Viewing Status Information and Resetting the Lamp Timer
You can use the Info page on the Visual Setup menu to view the number of hours the lamp
has been used, and to reset the timer after you install a new lamp. You can also view video
signal information and error codes for any problems that occur.
1. Press
2. Press
information.
Note: If the lamp has been used less than 10 hours, 0H is displayed.
3. To reset the lamp timer after replacing the lamp, press
4. Press
52
Doing More with PowerLite Presenter
on the remote control. You see the Visual Setup menu.
to highlight
, then press
Info
to exit.
to display the lamp usage and other
.