Adjusting Picture Quality; Using The Others Setup Page - Epson PowerLite Presenter User Manual

Adjusting Picture Quality

You can use the Image page on the Visual Setup menu to adjust the
brightness, contrast, color saturation, tint, sharpness, and other settings
that affect image quality.
Note: You cannot change Image page settings when the Color Mode is set
to Auto.
1. Press on the remote control. You see the Visual Setup menu.
2. Press to select
3. Press until you see the option you want to set.
You can adjust the following items for various viewing conditions and individual videos:
■ Brightness
■ Contrast
■ Color Saturation
■ Tint
(only works on NTSC signals)
■ Sharpness
■ Color Temp.
■ Auto Iris
(Adjusts the light intensity based on the brightness of the displayed image.)
4. Press or to increase, decrease, or change the setting.
5. Press to exit the menu.

Using the Others Setup Page

The Others Setup Page lets you select various settings, including screensaver and password
options. You can also return all settings to their defaults.
1. Press on the remote control. You see the Language Setup page.
2. Press to display the Others Setup Page.
3. Press to highlight the setting you want, then press
4. Press to select the option you want, then press
the following:
■ Screen Saver:
more than 15 minutes. Select
.
Image
( makes the image more blue;
High
By default, the screen saver starts when a still image is projected for
to turn off this setting.
Off
makes it more red.)
Low
to view or change the option.
to save it. You can choose from
Doing More with PowerLite Presenter
49