Saving Power; Changing Language Settings - Epson PowerLite Presenter User Manual

Saving Power

The power turns off automatically when a DVD is stopped for more
than 30 minutes. You can select a time to turn off the projector while a
DVD is playing, in case you fall asleep while watching.
To select a sleep setting, press
select from the following settings:
■ Sleep Off:
of inactivity (default setting).
■ Sleep 10, 20, 30, 60, 90, 120, 150:
automatically after the number of minutes specified, whether or
not a movie is playing. You can select from
After you set the sleep timer, you can see the time remaining by pressing
Note: Sleep timer settings are not saved after you turn the projector off.

Changing Language Settings

You can use the Language Setup Page to change the default language for DVDs that allow
you to make this selection.
1. Press the
2. Press
available.
OSD Language
be available, depending on the DVD you are playing.
3. Press
codes, see page 74.
4. To exit the menu, press
48
Doing More with PowerLite Presenter
. Continue pressing the button to
The power switches off automatically after 30 minutes
button on the remote control. You see the Language Setup Page.
to highlight the setting you want, then press
is the language used for the projector's menus. Other settings may not
to select the language you want, then press
.
The power switches off
to minutes.
10 150
to save it. For a list of language
.
to display the list of languages