Preparation; Status Display Of Disc - Sansui HDLCDVD190 Owner's Manual

Preparation/Status display of disc
The following pages describe the
setup/operation in DVD mode.
NOTE:
• If the unit does not operate
properly:
Static electricity, etc., may affect the
player's operation. Disconnect the
AC power cord once, then connect it
again.
38

Preparation

Before DVD/CD operation, please make the following preparations.
1
Insert the AC cord plug into a standard 120V 60Hz polarized
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER.
NOTE: When connecting to other equipment, unplug the unit
from the AC outlet.
2
Press POWER on the unit or on the remote control to turn on
the unit. The POWER indicator will light.
• Each time you turn the unit ON, the TV/DVD starts from the
TV mode.
• When using an amplifier, switch on the amplifier.
3
Press TV/DVD to select DVD
mode.
The DVD startup screen will
appear on the screen.

Status display of disc

Press DISPLAY. The status display of the disc will appear on the
screen.
DISC OPERATION
TITLE NO.
DVD
Title 1/3
1/1 Eng Dolby Digital
1/1
ANGLE NO.
AUDIO LANGUAGE
To make the status display screen disappear, press DISPLAY
again.
ELAPSED TOTAL
TIME TIME
00:15:25 01:41:39
Chapter 2/24
1/2 Eng
SUBTITLE LANGUAGE
A KIND OF AUDIO
CHAPTER
NO.