Setting The V-Chip - Sansui HDLCDVD190 Owner's Manual

An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures
that you may choose to exclude. The restriction applies to "TV RATING" and "MPAA" if this data is
transmitted. You may set this restriction separately. To use the V-Chip function, you must register a
password.
NOTE:
• If you forget the password, contact
Customer Service at 1-800-289-0980
for assistance.
Your original remote control will be
required.
• To avoid forgetting the password,
write it down and keep in a safe place.
To register a password
1
Press SETUP/TV MENU
in the TV mode. The
menu screen will appear.
Press ▲ or ▼ to select
"Feature" menu, then
press ▶.
2
Press ▲ or ▼ to select
"Password Set", then
press ▶ or ENTER.
3
Use Number buttons
(0-9) to enter your
password
(The factory default
password is "0000").
4
Select and enter a
password (4 digits) using
Number buttons (0-9).
5
Enter the same password
again to confirm.
The password is now
registered.

Setting the V-Chip

Sleep Timer
Picture
Advanced Video Menu
Password Set
Parental Control
Audio
NTSC CC
ATSC CC
Setup Digital Closed Caption
Feature To Move Enter
Sleep Timer
Picture
Advanced Video Menu
Password Set
Parental Control
Audio
NTSC CC
ATSC CC
Digital Closed Caption
Setup
Feature To Move
Enter
Enter Old Password
" " appears instead of the number.
Enter New Password
Confirm New Password
Off
Off
Off
To Select Menu To Exit
Off
Off
Off
Menu To Exit
To Select
23