Preparation/Status Display Of Disc - Sansui LCDVD200 Owner's Manual

Preparation/Status display of disc

The following pages describe the
setup/operation in DVD mode.
NOTE:
If the unit does not operate properly:
Static electricity, etc., may affect the play-
er's operation. Disconnect the AC power
cord once, then connect it again.
28
Preparation
Before DVD/CD operation, please make preparations as follows.
1
Insert the AC cord plug into a standard 120V 60Hz polarized
AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER.
NOTE: When connecting to other equipment, unplug the unit
from the AC outlet.
2
Press POWER on the unit or on the remote control to turn on
the unit. The POWER indicator will light.
• Every time you press POWER, the TV/DVD starts from TV
mode.
• When using an amplifier, switch on the amplifier.
3
Press TV/DVD to select DVD
mode.
The DVD startup screen will ap-
pear on the screen.
Status display of disc
Press DISPLAY/CALL. The status display of the disc will appear
on the screen.
DVD
Title number
Chapter number
Disc operation
T C
Audio language
A kind of audio
To make status display disappear, press DISPLAY/CALL again.
Audio CD
Track elapsed playing time
Disc operation
6
Track number
Play list
• When you play a CD disc, the status display will appear
and remain on the screen.
No Disc
Title elapsed playing time
Title total time
Camera angle
Subtitle language
Track total time