Memory Function; Memory Recall - Lumiscope 1103 Instruction Manual

10 MEMORY FUNCTION

Memory Recall

1. Model 1103 can store 90 sets of readings and will automatically calculate the average of the last 3
readings. When memory is full (90 sets of readings are stored), the oldest reading will be replaced
by the newest. Memory will not clear even if the batteries are removed;
Fig. 10-1
2. After a measurement is finished, or when the device is in standby mode, the user can press
button "M" to recall memory. Press button "M" to display the average value of the last 3 readings
as shown in Fig. 10-1;
Fig. 10-2
3. Press button "M" again, the device displays "01"; then after 1-2 seconds the latest reading will
display as shown in Fig. 10-2;
13