Gerber Fastrack Owner's Manual page 2

COPYRIGHT 1999 Gerber Scientific Products, Inc. All Rights Reserved.
This document may not be reproduced by any means, in whole or in part, without written permission of the
copyright owner.
This document is furnished to support the FasTrack™ Cutter. In consideration of the furnishing of the
information contained in this document, the party to whom it is given assumes its custody and control and
agrees to the following:
1. The information herein contained is given in confidence, and any part thereof shall not be copied or
reproduced without written consent of Gerber Scientific Products, Inc.
2. This document or the contents herein under no circumstances shall be used in the manufacture or
reproduction of the article shown and the delivery of this document shall not constitute any right or
license to do so.
Information contained in this document is subject to change without notice.
GRAPHIX ADVANTAGE and GSP are registered trademarks and FasTrack is a trademark of Gerber
Scientific Products, Inc. HPGL is a trademark of Hewlett-Packard Company. Windows is a registered
trademark of Microsoft Corporation in the U.S. and other countries. MS-DOS and Microsoft are registered
trademarks of Microsoft Corporation. HPGL is a trademark of Hewlett-Packard Company.
COPYRIGHT NOTICE
Printed in USA