Duerkopp Adler 2211-5 Working Instructions page 90

Beisler Automated Sewing Equipment
D.3
D.3.8 List of special parameters
No.
TACKING LENGTH SEAM END:
17
Final bar tack length only for lock stitch
STITCH LENGTH SEAM BEG:
18
Stitch length at beginning of seam (input 5.0 mm max.)
DISTANCE OF THIS ST.LEN:
19
Distance of stitch length at beginning of seam
ST.LENGTH OF MAIN SEAM:
24
Stitch length for main seam (input 5.0 mm max.)
STITCH LENGTH SEAM END:
25
Stitch length at end of seam (input 5.0 mm max.)
DIST.OF THIS ST.LENGTH:
26
Distance of stitch length at end of seam
ST.LENGTH TRIMM.STITCH:
27
Stitch length of cutting stitch (input 5.0 mm max.)
CHOICE OF TRIMMING ST.:
Cutting stitch
28
Input 00: Last stitch forward
Input 01: Last stitch rearward
START MODUS ..........:
30
Start mode preselection
LAMP/CURVE CODE:
31 On: 01
Off: 00
BLOWING MODUS ........:
Blowing, mode
32
Input 00: Alle nozzles off
Input 01: Nozzle for blowing off sewing pieces switched on
PUSH RETAINER MODUS:
33 On: 01
Off: 00
SWING RETAINER MODUS:
34 On: 01
Off: 00
ADDITIONAL TRANSPORT SECTION:
37
section of additional transport traverse path
ADDITIONAL TRANSPORT SYNCHRONIZING:
38 ratio of speed to main clamp
adjustment range: 75% to 125% (synchronious at 120%)
Programming
Programmable special parameters in lists (F3)
Short Seam Automat 2211-5 Working Instructions
- D 90 -