Duerkopp Adler 2211-5 Working Instructions page 88

Beisler Automated Sewing Equipment
D.3
D.3.7 List of global parameters
No.
TILL SCISSORS CLOSED:
26
Time until scissors close / time interval
DURATION SCISSORS CUTS:
27
Cutting action of scissors / duration
TILL FABRIC CLAMP OPEN:
28
After cutting action, time until clamps opens / time interval
TILL SWING RETAINER DWN:
29
Lower swing retainer after seem has been sewn
TILL RETAINER SWINGS:
30
Swing retainer after retainer has been lowered
DUR. OF PULLING RETAINER:
31
Time during which the retainer pulls
BLOW OUT THE PART ....:
32
Blow off sewing piece / duration
CLAMP MOVES TO STACKER:
33
Time until moving begins / time interval
STACKER STAMP OPEN:
34
Distance how long the stamps will transport the sewing piece / traverse part
THREAD CATCH. "UP" POS:
35
Thread lever in top position / duration
SWITCH ON POS.OF TRIMM.:
36
Switch-on position for thread cutting: Input value 01-255
TRIMMING SPEED ......:
37
Speed during thread cutting
DURATION OF TRIMMING:
38
ON duration for thread cutting
THREAD CATCH.TURNS BACK:
39
Thread lever reversing angle
PROCESS IN STEPS .....:
40
Gradual operation
Programming
Programmable global parameters (F2)
Short Seam Automat 2211-5 Working Instructions
- D 88 -