Aux Pitch Mode; Edit Mode - ToneWorks Pandora PX4 Owner's Manual

Personal multi effect processor
Hide thumbs Also See for Toneworks Pandora PX4:
Table of Contents

Advertisement

Available languages

Available languages

AUX Pitch mode

In this mode you can transpose the pitch of a CD
or other audio source connected to the AUX jack.
Press the AUX PITCH button to enter AUX Pitch
mode. When you are in this mode, the AUX Pitch
icon will light.
Use the Value dial to specify the amount of key
transposition. The key can be transposed in a
range of +/-1 octave.
The value can be adjusted upward and down-
ward for 3 semitones in 10 cent steps, and in
semitone steps (100 cents) for the remainder of
the range.
AUX Pitch icon
The output will be mono in AUX Pitch mode.
The AUX Pitch setting is remembered even
when the power is turned off.
22
Display of
10 cent units
Display of
100 cent units

Edit mode

In this mode you can turn each effect on/off, and
edit the effect type, parameter values, and pro-
gram name.
In Play mode, press the √ (or ®) button to ac-
cess the DYNA effect edit screen, entering Edit
mode.
In any screen of Edit mode, you can use the con-
trol knobs to edit Amp modeling, or use the TAP
button to set the delay time of Delay modeling.
Press the EXIT button to return
to Play mode.
If a program was not written af-
ter it was edited, the decimal
point of the program number will
light.
The edited settings will return to the settings of
the original program if you switch programs or
turn off the power without Writing (see p.26).
Before
writing
After
writing

Advertisement

Table of Contents
loading

Table of Contents