Calibration (Frequency Of The Standard A Pitch); Hbb (Hyper Bass Boost); Specifying The Function Of The Value Dial - ToneWorks Pandora PX3 Owner's Manual

Calibration (frequency of the standard A pitch)

You can use the Value dial to adjust calibration
in the range of A = 438 Hz–445 Hz.
The calibration setting you make will be valid until
the power is turned off. Once the power is turned
off, calibration will be reset to A = 440 Hz the
next time the power is turned on.

5. HBB (Hyper Bass Boost)

This function boosts the low-frequency range that
is often insufficient when using small head-
phones. This function is also effective when the
Pandora is connected to a guitar amp or mixer.
Use the HBB button to switch HBB on/off. When
HBB is on, the HBB icon (
screen.
The HBB on/off setting is remembered even
when the power is turned off. The same setting
will still be in effect the next time the power is
turned on.
It is not possible to switch this function on/off
when the PANDORA is bypassed or muted.
22

6. Specifying the function of the Value Dial

You can specify the function that the Value dial
will perform in Play mode.
In Play mode, hold down the EXIT button and
press either the EDIT
ton, or the BYPASS · TUNE button to assign the
following functions.
) will light in the
The Value dial will adjust the master level, and
the +/- buttons will select programs. You can use
the Value dial to adjust the master level quickly.
Each time the power is turned on, this setting
will be in effect.
√
This setting cannot be changed during by-
pass/mute.
Hold down the EXIT button and press the
EDIT button.
√
The LCD will indicate "MASTER" for approx-
imately one second.
button, the EDIT but-
®
hold down