Rename; Write - ToneWorks Pandora PX3 Owner's Manual

8) RENAME

Here you can specify a name for each program.
• +/- buttons: Select the character location (the
selected character will blink)
• Value dial: Select the character
The following characters can be used:
space, 0–9, A–Z, ", ', *, +, -, /

9) WRITE

Here you can write (store) an edited program or
a program that you created.
Use the Value dial to select the writing destina-
tion (User programs only). When you do so, the
name of the program that currently occupies the
writing destination will be displayed briefly.
If you decide not to write, press the EDIT
ton to select a different screen.
When you press the BYPASS · TUNE button, the
edited program will be written into memory.
When the program has been written, the LCD
will indicate "COMPLT" for approximately one
second.
• BYPASS · TUNE button: Write
• Value dial: Select a user program number
as the writing destination
Before writing an edited program into a dif-
ferent program number, be sure that you do
not mind overwriting the data that is current-
ly in that program number. The program data
that is overwritten will be lost.
It is not possible to write to a preset program.
but-
√
33