Tuner - ToneWorks Pandora PX3 Owner's Manual

blinking
If you press and hold the BYPASS · TUNE but-
ton for longer than one second, the output sig-
nal will be muted.
The effect chain will blink rapidly, and the dis-
play will indicate "MUTE" for approximately one
second.
rapid blinking
Bypass/mute will be turned off when you either
press the BYPASS · TUNE button once again,
or change the program.

4. Tuner

The tuner will operate when you bypass or mute
in Play mode.
meter
center mark
Play a single string on your guitar. The LCD will
show the note name and the calibration. If the
pitch is more than a semitone higher than the
note name, a sharp symbol will appear at the
upper left of the note name.
The display area will act as a meter to show the
pitch deviation.
Tune the string of your guitar so that the indica-
tor above the center mark is lit.
The tuner (bypass/mute) will be turned off when
you either press the BYPASS · TUNE button or
change the program.
sharp
note name
calibration
21