Edit Mode; Select The Effect That You Wish To Edit; Editing Each Effect; Drive - ToneWorks Pandora PX3 Owner's Manual

Edit mode

Here you can switch each effect on/off, select
the effect type, modify the parameter values, etc.
In Play mode, press the EDIT
Edit mode.

1. Select the effect that you wish to edit

Use the EDIT
√
that you wish to edit.
Each time you press an EDIT
will cycle through the effects in the order shown
below. When an effect is selected, its icon will
blink.
Effects that are turned off cannot be edited.
To turn an effect on, use the EDIT
to select the effect, and press the BYPASS · TUNE
button.
30
button to enter
®
/ buttons to select the effect
®
/ button, you
√ ®
/
√

2. Editing each effect

For each effect, you can select the effect type
and set its parameter values. For details on ef-
fect types and their parameters, refer to the Ef-
fect Parameter List (

1) DRIVE

This provides effects such as compressor, and
a variety of overdrives and distortions.
• BYPASS · TUNE button: Turn the effect on/
off
• +/- buttons: Select the effect type
• Value dial: Specify the parameter value.
buttons
®
p.36).