Table of Contents
Advertisement
To Change Headphone Sound Settings
Pressing " " or " " button on HEADPHONE, enter the Head-
phone menu. This is a sub-menu of Sound menu, and all op-
tions in this menu are working as the same in the Sound menu.
Setting Headphone Volume
• As you enter the Headphone sound menu, Volume will be the
first selected option.
• Press " " button to increase volume.
• Press " " button to decrease volume.
Setting Headphone Balance
• When balance control is in mid position, the cursor is displayed
with the two reciprocal arrows.
• Using " " or " " button select Balance.
• Press " " button to change balance right-wards.
• Press " " button to change balance left-wards.
Setting Headphone Mode
• Using " " or " " button select Mode.
Pressing " " or " " button will change the current sound mode.
(e.g.: If the current sound mode is stereo, it will be stereo or visa
versa).
In case of bilingual broadcast, you can select original or dubbed
language again using mode menu. So when somebody listens
to the original language from the loudspeakers, somebody else
can listen to the dubbed language from headphone.
To Store the Settings
• Using " " or " " button select Store. Press " " or " " button
to store current headphone volume and balance. The stored
values will be valid for all the programmes.
To Store the Settings
• Press " " or " " button on "STORE" option to store Sound
menu settings.
01-ENG-(CG32W460AN)-3253W-3040-AK37-ST7P-PLLFS-APS-BG-50050266.p65
GB - 10 -
10
Picture Menu
• To enter the Picture menu directly, press the "GREEN" button,
or
• Press "
" button, now you are in Main menu. In the Main
menu, select "PICTURE" using " " or " " button, then enter
the Picture menu pressing " " or " " button.
Setting Brightness
• As you enter the picture menu, Brightness will be the first
selected option.
• Press " " button to increase brightness.
• Press " " button to decrease brightness.
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
MODE
STORE
Setting Contrast
• Using " " or " " button select Contrast.
• Press " " button to increase contrast level.
• Press " " button to decrease contrast level.
Setting Colour
• Using " " or " " button select Colour. .
• Press " " button to increase colour level.
• Press " " button to decrease colour level.
Setting Sharpness
• Using " " or " " button select Sharpness.
• Press " " button to increase sharpness.
• Press " " button to decrease sharpness.
13.07.2004, 13:42
4:3
Advertisement
Table of Contents
