Operating With The Buttons On The Tv Set; Operating With Remote Control; Menu System; Sound Menu - Hitachi CG32W460N Instruction Manual

Operating with the buttons on the TV set

Volume setting and programme selection can be made us-
ing the buttons on the front panel.
Volume Setting
• Press "- VOLUME" button to decrease volume or "VOLUME+"
button to increase volume, so a volume level scale (slider) will
be displayed at the middle of the bottom on the screen.
• By pressing both the "VOLUME +" and "- VOLUME" buttons
at the same time you can enter Main menu.
Programme Selecting
• Press "PROG. +" button to select the next programme or
"PROG. -" button to select the previous programme.
Entering Main Menu
• Press "MENU" button to enter Main menu. In the Main menu
select sub-menu using "PROG. -" or "PROG. +" button and
enter the sub-menu using "- VOLUME" or "VOLUME +" but-
ton. To learn the usage of the menus, refer to the Menu Sys-
tem section.

Operating with Remote Control

The remote control handset of your TV is designed to control all
the functions of the model you selected. The functions will be
described in accordance with the menu system of your TV.
Functions of the menu system are described in Menu System
section.
Volume Setting
Press "VOL+" button to increase volume. Press "VOL-" button
to decrease volume. A volume level scale (slider) will be dis-
played at the middle of the bottom on the screen.
Programme Selecting (Previous or next programme)
• Press " " button to select the previous programme.
• Press " " button to select the next programme.
Programme Selecting (direct access)
Press digit buttons on the remote control handset to select
programmes between 0 and 9. TV will switch to the selected
programme. To select programmes between 10 - 99, you must
use the double digit button "- -".
this OSD is displayed at the left hand upper on the
screen.
After this, press the digit buttons consecutively for the
programme you want to select (eg. for programme 27, first press
2 and then 7). If the second digit is not entered within 3 seconds,
this function will disappear.
Press directly the programme number to reselect single digit
programmes.
01-ENG-(CG32W460AN)-3253W-3040-AK37-ST7P-PLLFS-APS-BG-50050266.p65 8
Programme Swapping
• Press "P<P" (programme swap) button to select the last se-
lected programme. This button provides swapping between
last two selected programmes. For example, select
programme 8, then select programme 2. Now, if you press
"P<P" button, programme 8 will be selected. If you press the
same button again, programme 2 will be selected and so on.

Menu System

Your TV has been designed with a menu system, to provide an
easy manipulation of a multi-function system. The TV is con-
trolled by choosing the commands, which are displayed on the
screen.
Press the " " button. The Main menu will be displayed at the
middle on the screen.
All the selected items in this menu system is indicated with
CYAN characters and with an arrow on the leftside of items.
To select a sub-menu use " " or " " button, and press " " or
" " button. Each option can also be selected with the coloured
button and " " button on the remote control.
MAIN MENU
The menu system is described below.
The short way in order to enter the menus, press :
" " Button,
Red Button,
Green Button,
Yellow Button,
Blue Button,
" " Button,
Menu button has two functions; first is opening or closing the
"MAIN MENU", and the second is closing the sub-menu and
then opening its parent menu.

Sound Menu

To change sound settings
• Enter the Sound Menu directly, pressing the Red button or,
• As you enter the main menu, sound will be the first selected
option. In the main menu, select SOUND using " " or " "
button, then enter the sound menu pressing " " or " " but-
ton.
GB - 8 -
13.07.2004, 13:42
Main Menu.
Sound Menu.
Picture Menu.
Feature Menu.
Install Menu.
Programme Menu.