Table of Contents
Advertisement
Setting Hue
(During Playback NTSC system, this will appear in AV mode
only when NTSC video source is applied. Otherwise, HUE
option is invisible in Picture menu.):
• Using " " or " " button select Hue.
• Press " " button to increase hue level.
• Press " " button to decrease hue level.
Center value is indicated with the two reciprocal arrows.
Mode
This item is used to change the picture size. By pressing " "
or " " button you may choose one of these options: "4:3",
"16:9", "14:9", "CINEMA", "SUBTITLE" and "AUTO". It is also
possible to change picture modes directly by pressing button
"
" on your remote control.
• 4:3 This option forces the picture ratio to 4:3 mode.
• 16:9 This option forces the picture ratio to 16:9 mode.
• 14:9 This option forces the picture ratio to 14:9 mode.
• Cinema This option forces the picture ratio to Cinema mode.
• Subtitle This option forces the picture ratio to Subtitle mode.
• AUTO This allows to change the picture mode automatically,
according to the transmission of the selected channel. For
example, your TV is 4:3 mode, but the transmission of that
channel is in 16:9 mode. If you select the AUTO mode, the TV
is switched to 16:9 mode automatically. If the TV is in 4:3 mode
and the picture ratio of the channel is also 4:3, there will be no
affect selecting the picture mode to AUTO mode.
WSS feature is only used in TV and F-AV modes. For the Pic-
ture Mode selection in AV-1 and AV-2 the pin 8 (of Scart) value
is used. In RGB and SVHS modes the Picture Mode can be 4:3,
16:9, 14:9, "CINEMA" or "SUBTITLE" (Auto mode is not avail-
able.).
When the menu appears on screen, picture mode will automati-
cally change to its default tube mode (4:3 or 16:9) but it will
turned to its stored mode when the menu disappears.
01-ENG-(CG32W460AN)-3253W-3040-AK37-ST7P-PLLFS-APS-BG-50050266.p65
11
To Store the Settings
• Press " " or " " button on STORE option to store Picture
menu settings except Picture Mode.
Feature Menu
• To enter the Feature menu directly, press the "YELLOW"
button, or
• Press "
" button, now you are in Main menu. In the Main
menu, select FEATURE using " " or " " button. Then enter
the Feature menu pressing " " or " " button.
Sleep Timer
As you enter the Feature menu, SLEEP TIMER will be the first
selected option. Use " " or " " button to change the Sleep
Timer values between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00,
1:15:00, 1:30:00, 1:45:00 and 2:00:00.
It is displayed on the upper right of the screen. If sleep timer is
activated it is displayed with the TV status and erased with it after
3 seconds.
If there is left only one minute of the down counting of the timer,
it is displayed automatically on the upper right of the screen, and
stays there until time is reached. Then TV goes automatically
to stand-by.
Child Lock
You can use this feature to prevent children turning on TV or
changing programs or adjustments etc. without remote control.
The CHILD LOCK feature can be set by " " or " " button to
either ON or OFF. When OFF is selected, there will be no dif-
ference in the operation of your TV. When ON is selected, the
TV can only be controlled by the remote control handset. In this
case, the front panel buttons (except the Switch On/Off button)
will not work.
GB - 11 -
13.07.2004, 13:42
Advertisement
Table of Contents
