Related Manuals for Hanna Instruments HI 839800
Summary of Contents for Hanna Instruments HI 839800
- Page 1 Instruction Manual HI 839800 COD REACTOR and Test Tube Heater 2008 Series This Instrument is in w w w . h a n n a i n s t . c o m Compliance with the CE Directives...
- Page 2 ABBREVIATIONS °C: degree Celsius COD: Chemical Oxygen Demand All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner, Hanna Instruments Inc., Woonsocket, Rhode Island, 02895, USA.
- Page 3 HEALTH & SAFETY FUNCTIONAL DESCRIPTION Before unpacking, setting up or using this reactor it is important to carefully read this manual. Pay REACTOR DESCRIPTION particular attention to all warnings, cautions and notes. Failure to do so could result in serious injury to the operator or damage to the equipment.
- Page 4 OPERATING MODES TEMPERATURE SELECTION • Idle mode: the default mode. While in this mode the meter measures and displays the heater block temperature, an IDLE message, the target temperature and the reaction time. The reactor has 2 predefined temperature profiles: •...
- Page 5 • During operation, the block temperature will be slightly different for an empty block or one full of vials. DIGESTION PROCEDURE If cold tubes are placed in the block, the temperature will decrease several degrees and a few minutes will be required to recover as the tubes warm. •...
- Page 6 FUSE REPLACEMENT If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization Replace fuse only with fuse of specified type and current rating. Number from the Customer Service Department and then send it with shipment costs prepaid. When shipping any instrument, make sure it is properly packaged for complete protection.
Need help?
Do you have a question about the HI 839800 and is the answer not in the manual?
Questions and answers