Advertisement
8
On back of grill, place upper back panel between side panels, using two
1/4-20x1½" screws,
7mm lock washers and 7mm
flat washers on each side.
1/4-20x1½"
screw
7mm flat
7mm lock
washer
washer
9
Insert left and right grease tray rails into slots
beneath grease tray opening in upper back panel, shown A.
Attach right and
left rails under front brace with two #8x3/8" self-tapping screws, shown B.
A
B
Grease tray opening
Front Brace
Left rail
#8x3/8"
Right rail
self-tapping screw
Right rail
Left rail
18
Advertisement
