Advertisement
weak signal is received, the channel storage system wills automatically it asno signal.
5>. All the setting numbers will be preserved automatically in the EEPROM
address.
6>. It will quit the menu automatically if no any operation exceeds ten seconds.
6. CLOCK
SLEEP
TIME
OFF TIME
ON TIME
ALARM
B. TIME
B. PR
1>. Here are such functions are bellow: Sleep Time, OFF Time, On Time, Attention,
Booked Time and Booked Chinned.
2>. Press VOL+/VOL to set up clock, then press CH+/CH to choose ON Time.
VOLAdjust hour VOL+ Adjust mute CH+/CH Select items to be setup.
3>. Adjustment of other items is the same as that of Clock, and setup of clock for
all items is 24 hours at most.
4>. Upon setup of Clock, press CH+/CH to choose CH Time, upon setup, press
CH+/CH again to choose position, and puss VOL+/ VOL to adjust till the channel
number of desired program, the you will not miss the desired prigram.
7、TROUBLE SHOOTING
Phenomenon
No picture and sound
No sound
No color
No pictures
Remote Controller
Doesn't Work
Snowflake pictures
AC adapter or automobile adapter is improperly connected.
Uncertified power is being used. Power switch is off.
Audio volume is off or in mute condition. Press VOL+.
"Color" isn't open enter into "Puncture" to adjust it
It's Blackwhite TV program.
Wrong TV system is steed. Enter into the MENU "PICTURE
SYSTEM" to adjust its system.。
TV signal disturbance or the unit is in the protection condition.
Check the battery in the remote controller, make sure it installed
correctly. The power of battery is run out or the signal is
disturbed.
Antenna signal is weak. Make sure to connect the antenna
correctly.
8
0
:
:
:
:
:
:
Reason
Advertisement
