General Information - Eonon 7 Inch Headrest with pillow TFT LCD Monitor DVD Instructions Manual

1、GENERAL INFORMATION
Thank you very much for your purchase of this headrest with pillow LCD Monitor
.Player please Read this instruction manual and keeps it for future references.
2、PRECAUTIONS
1.1. It is made up of many precision electronic elements, and any dismantlement or
Refit will make it damaged or broken.
1.2. When operating the unit, please avoid contacting with the lCD panel.
1.3. Keep it away form the place where is too hot or too cold .Operating temperature
Of the unit is 32­92 degrees Fahrenheit.
1.4. Do not drop the monitor or impact it with hard objects. This may cause permanent
net irreversible damage to the LCD panel and /or the back light element.
1.5. During operation, if the unit over­heat or malfunction, switch off. Do not
Disassemble the unit by yourself. Please consult the company or the dealer.
1.6. The battery of the remote control unit has an estimated life cycle of five months.
To ensure proper functionality, replace the battery on a timely manner.
1.7. Do not use any chemical solvent, cleaning agent or corrosive detergent when
Wiping the display.
3、INSTALLATION GUIDE
Precautions
1．This unit should be installed by a qualified
service technician.
2．This product is designed to operate with a
12V DC negative ground battery system.
3．Disconnect the ground wife from the battery
terminal prior to connecting the unit to the
electrical system.
4．Please use accessories that come with this
unit in order to avoid fire or electrical
damage to it.
5．This unit fit any mode of car; the distance
between two poles can be adjusted.
6．Please use tools of screw to loosen the
screws and adjust the distance of two poles
to match the same distance distance of two
poles of automobile, finally use the same
tools to tighten the screws.