Download Print this page

Eonon TFT LCD Color TV Operating Instructions Manual page 7

Hide thumbs Also See for TFT LCD Color TV:

Advertisement

TFT LCD COLOR TV
6. Control brightness, color, contrast, and hue
Press MENU key
MENU
V-
Choose analog quantity, change in turn i.e.
brightness color contrast hue
Screen display
hue is only can be adjusted for NTSC organic
signal.
Warning
7. For the purpose of receiving clearer picture
To control the length, color, and direction of antenna of pull-
rod for the best picture After that please draw back the
antenna one by one.
If the signal is much weak, no matter how you
stretch with the antenna, picture will be bad,
noise, wobbling, and blur spots will show on
the TV, which is not the trouble of TV itself.
Warning
- 17 -
V+
If you select the same number with current programme
number, CPU will reread memory information relevant to
current programme number from EEPROM.
During programme being converted, (0-9) keys may be
used for directly selecting the programme number
required.
4. CH+, CH- / PROGRAMME+; PROGRAMME (remote
control and owned key).
1). Functions: Programme number + / -, selection in menu,
selection of adjustment items, function of calendar.
2). Description:
With CH+ / CH- to change programme number, and
programme number of SKIP ON will be appeared.
If all programme numbers are under SKIP ON state,
push CH+ / CH- key to select programme 0 only. If only
one programme number is under SKIP ON state, push
CH+ / CH- key to select this programme.
If CH+ has arrived at the largest programme number,
push again CH+ to skip to the littlest programme
number; contrary to that if CH- has arrived at the littlest
programme number, push again CH- to skip to the
largest programme number.
After conversion current programme and the last
programme number will be changed and written into
EEPROM.
In full-screen menu, CH+ and CH- are used to select
items in menu (Please refer to related operation
instruction).
In calendar state, with CH+ and CH- to change years.
5. VOL+, VOL- / Volume+, Volume- (remote control and
owned key)
1). Functions:
To control volume; Adjust all items in menu; adjust all
debugging items and months of calendar.
- 6 -
TFT LCD COLOR TV

Advertisement

loading