Eonon TFT LCD Color TV Operating Instructions Manual page 4

TFT LCD COLOR TV
Installation and connection methods
Please refer to the Body Figure
Fuse 2A
Red wire --ACC switch
Green wire - backing-up
control wire
Yellow wire - accumulator of 12V
Black wire -- grounding
Please connect backing-up camera head from
V2 white import, when green wire is connected
to backing-up signal lamp (12V); When
backing-up, automatically entered into V2, and
Warning
after backing-up, original state returned.
Figure of installing batteries into remote controller
- 3 -
White wire - video
frequency V2
Red wire - audio input
Yellow wire - video frequency V1
Antenna input port 1
Antenna input port 2
Descriptions
AC adapter or vehicle adapter are wrongly
connected.
No pictures
Uncertified power is under using.
or sounds
If TV/AV is correctly selected?
If channel is rightly selected?
No pictures Auto reset receiving channel.
Reset channel in other new places.
If volume is rightly adjusted?
If earphone has been connected?
No sounds
Signal and mute are under functions.
If antenna is rightly adjusted?
Poor contact
If channel is rightly adjusted?
If brightness and contrast are rightly adjusted?
Dark picture
If ambient temperature is too low?
If antenna is rightly adjusted?
Blur picture
Maybe received local signal is too weak.
or non-stable
If antenna direction is right?
Double image Maybe signals reflected by nearby buildings or
high walls are received.
Maybe interfered by electric wave of motors of
Blur pots vehicles, trains, high-pressure wires and neon
lamps.
If color adjustment is under good state?
No colors
For poor signal achromatic in under function
If batteries have been used up?
No operation of
If receiver has exposed on violent light?
remote controller
- 20 -
TFT LCD COLOR TV
Reasons