Eonon TFT LCD Color TV Operating Instructions Manual page 11

TFT LCD COLOR TV
1. Color organic
Press V+ and V- to convert between color organics.
2. Sound organic
Press V+ and V- to convert between color organics.
3. Channel adjustment
Press V+ and V- to select channels required adjusted.
4. Auto search
VHFL
Press V+ to access to auto search state and to memory
from Channel 1. Auto mute, close down blue screen and
then return to Channel 1 after search, and to press MENU
to stop searching.
5. Manual search
Press V+ for channels in front and V- for channels after.
After a channel is found, it will be stopped auto. Press
MENU to return to Search Menu. During searching press
MENU to stop this action and return to SKIP MENU.
6. Fine tuning
Press V+ for channels in front and V- for channels after. At
the same time to write into EEPROM, and AFC is set to
OFF State. Press MENU to return to Search Menu.
7. Converting between Frequency Channels
If you use of FS high frequency, it cannot be adjusted, if
you use of VS high frequency, press V+ and V- to change
different frequency channels. VHFL VHFH UHF VHFL,
during converting AFC should be closed down.
- 13 -
Press CH+ and CH- to select items required to adjust, and V+
and V- to change parameter of adjusted items. There is a
drop-down strip showing that there are other options, please
refer to the following picture.
1
1. Language
2. Blue Screen
3. Mode
4. Up or Down
5. Right or Left
6. Calendar
7. Games
S
CALENDAR
GAME
E
T
Including Chinese, English, French, Russian, and German.
Blue Screen is used to determine that whether blue screen
is needed to be on or not without signals.
Three modes for selection: normal, full screen and broad
screen (invalid on vehicle).
To control the picture be up or down.
To control the picture be right or left (invalid on vehicle)
Open the calendar.
Turn on sub-games in sliding box.
- 10 -
TFT LCD COLOR TV