Eonon TFT LCD Color TV Operating Instructions Manual page 6

TFT LCD COLOR TV
3. Key functions and display descriptions
1. Standby key (remote control)
1). Functions: standby or to normal state
2). Description:
When power is on, the TV is under standby state.
To push standby key for converting between standby
state and normal state.
During standby state other keys are off except standby
key.
Starting the TV signals of factory will be found.
2. TV/AV (remote control and owned key)
1). Functions: Converting between TV mode and AV mode
2). Description:
With two-way AV input.
To push this key for converting between TV state and
AV state.
Under AV state, if you push numeric keys such as 0-9, -,
-, CH+, CH-, and RECALL, it will be valid return to
relevant TV channel.
3. 0~9 (remote control)
1). Functions: Directly select programme / swiftly select
adjustment items.
2). Description:
For 0~9 programme please directly push 0-9 keys; for
10-255.
Programme please firstly press (- -) key to select double
bits or 3 bits, and then with (0~9) key to log into hundred
bit, tens bit, and ones bit in turn.
If your selection is beyond 255, the key is invalid.
After change, current programme number and the last
time shall be changed and will be auto written into
EEPROM.
- 5 -
6. Reset Receiving Channel
For the LCD TV you can use Screen Display to adjust picture
and sound, and set up channel and other characteristics.
Please refer to following required items and set them up.
Preset channel: 256 channels can be memorized
Auto View & Memory
Method 1: Press AUTO of report controller and PRESET mode
will appear, and then press AUTO for auto view and
memory. The selected channels will be memorized
in programme number for example 1, 2, 3
auto view, the picture shows programme 1.
Method 2: Press MENU for 3 seconds then PRESET will
appear, and then press V+ or V- for auto view and
memory.
To set up favorable channel
1. Press MENU for 3 seconds then PRESET mode will appear.
2. Press CH+ or CH to select BAND options, and press V+ or
V- to select favorable reset band.
3. Press CH+ or CH to select SEARCH options ahead or
backward from current channel, which should not be
stopped until TV signal received.
4. Press MENU for another 2 times or after 10 seconds menu
will auto disappear to return to normal state.
Fine Tuning for Frequency
1. Press MENU for 3 seconds and PRESET mode will appear.
2. Press CH+ or CH- to select CH options and press V+ or V-
to select favorable Fine-Tuning programme number.
3. Press CH+ or CH- to select FINE TUNE options and press
V+ or V- for continuous fine-tuning until your consent
picture appears.
4. Press MENU for another 2 times or after 10 seconds menu
will auto disappear to return to normal state.
- 18 -
TFT LCD COLOR TV
. After