Carton Inventory; Hardware Inventory - Chamberlain 1270LMC 1/2 HP Owner's Manual

Your garage door opener is packaged in two cartons which contain all parts illustrated below. If anything is
missing, carefully check the packing material. Parts may be "stuck" in the foam. Hardware for installation is
also listed below.
LO CK
LIG HT
Multi-Function
Door Control Panel
2-Conductor Bell Wire
White & White/Red
Header Bracket
Belt
Pulley Bracket
Safety Reversing Sensor
Mounting Bracket
With Slot (2)
Installation Hardware
Hex Screw 5/16"-18x7/8" (4)
Hex Screw #8x3/8" (2)
Lag Screw 5/16"-18x1-7/8" (4)
Carriage Bolt 5/16"-18x2-1/2" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1" (2)
Nut 5/16"-18 (6)
Lock Washer 5/16" (6)
Opener Carton Inventory
Single-Function
Remote Control
Transmitter (1)
Light Lens (2)
Door Bracket
Trolley
Safety Reversing Sensor
Mounting Bracket
With Square Holes (2)
Screw 6ABx1" (2)
Handle
Insulated Staples (10)
Ring Fastener (3)
Rail Grease
Rope
Dry Wall Anchors (2)
Remote Control
Transmitter Visor Clip
Belt
Door Bracket Plate
One-Piece
T-rail
Safety Reversing Sensor (2)
(1) Sending Eye
(1) Receiving Eye
Safety Labels
and
Literature
5
Belt Cap Retainer
Styrofoam
Curved Door
Arm Section
2-Conductor Bell Wire
with Connector (2 rolls)
White & White/Black
Straight Door
Arm Section
"C" Wrap (2)
Safety Reversing Sensor
Installation Hardware
Lag Screw 1/4"x1-1/2" (4)
Carriage Bolt 1/4"-20x1/2" (4)
Lock Nut 1/4"-20 (4)
Wing Nut (2)
Hex Screw 1/4"-20x1-1/2" (2)
Screw #10-32x3/8" (4)
Lock Nut #10-32 (4)
Insulated Staples (20)