Automatic Lowering Wta 13 - 2 - DURKOPP ADLER 767 Instruction Manual

10.5 Automatic lowering WTA 13 - 2

This is an optional item to go with the upper and lower conveyor rollers. It enables the
stitches to be adjusted from the beginning of the seam to the automatic lowering of the
upper roller. This ensures that the roller is not lowered until the material is beneath it.
Manual operation
Parameter
F-186 = 0
Automatic operation
Parameter
F-186 > 0
F-260 = ON or OFF
F-261= 0
F-261 = 1
F-261
F-261
F-262
F-262 = 1
38
Function
Lowering or lifting the feed roller through
actuating the button.
Function
Automatic lowering of the roller after a
number of stitches have been set
Stitch delay after sewing foot lowering until roller
lowering in the seam
OFF = Stitch delay Off
ON = Stitch delay On
Lift roller, but without sewing foot lift and backtack
Lift roller with sewing foot lift and backtack
Lift roller only with sewing foot lift
Lift roller only with backtack
Roller remains lowered when switching on high lift
for walking foot
Roller is lifted, when switching on high lift for
walking foot