6.
Sewing drive
6.1 Connecting the HoHsing HVP 70-4-ED-2-CE sewing drive
6.1.1 Connecting the control unit
12
ATTENTION!
Only qualified electricians or other persons with an adequate training
may work on the electrical equipment of this special sewing machine.
The mains plug must be removed!
The instruction manual of the drive's manufacturer must
imperatively be respected!
Connector sockets HoHsing HVP 70-4-ED-2-CE
Effectuate all plug connections according to the sketch shown here.
–
Connection of the sewing drive 1
–
Encoder of the sewing drive 2
–
Set value initiator 3
–
Control connection of the thread trimmer and thread tension
release 4
–
Connection of the external operating panel 5
–
Connection of the proximity switch 6
1
2
6
3
5
4