Instructions For Putting The Electronically Controlled Drive Into Operation; Power Supply 1 X 230 V - Dc Motor - Duerkopp Adler 527 Instruction Manual

12. Instructions for putting the electronically controlled drive into operation

When putting these drives into operation, observe the hints mentioned in the accompanying documentation of the manu-
facturer of this drive. The inobservance of these hints may cause damage of the drive or of the sewing machine head.
Caution!
The voltage in the mains must comply with the voltage given on the drive plate.
Caution!
The lighting transformer is not switched off by the main switch (EN 60204-3-1). When proceeding to a repair in the
transformer box (e.g. replacement of fuses), it is absolutely necessary to disconnect the mains plug from the mains!
Such operations may be carried out only by workers having the respective electrotechnical qualification.
Choose the suitable connection variant according to the following figures:

12.1 Power supply 1 x 230 V - DC motor

Circuit layout - Evropa
Circuit layout - Amerika
Transformer for sewing area bulb
Transformer for sewing area bulb
9
Machine
stand
Machine
head
Machine
stand
Machine
head