Table of Contents
Advertisement
8. Mounting of the equipment for backward stitching (Fig. 11, 12)
Remove the backward stitching lever and the knob for setting the stitch length.
Mount the knob (1) and the shaft (2).
Put on the lever (3) with the magnet (4) on the shaft (2) and fasten the magnet with screws (5) to the machine arm. Using the
screw (6), fasten the lever (3) on the shaft (2).
Connect the magnet conductor through the cutout in the table top into the outlet on the motor and head interconnecting
cable. - see par. 12.4.
Using the screws (7), fasten the push button holder (8) to the machine arm. Fasten then the conductor using the clips (9) to
the machine arm.
8
7
9. Mounting of the lighting (Fig. 13, 14)
Screw on the roller (2) using the screw (1) on the machine head, put on the lighting on the roller (2) and tighten it with the
crank-handle (3).
The assembling procedure of the transformer is described in par. 5.1.
9
1
2
Fig. 11
Fig. 13
7
4
3
2
6
5
Fig. 12
3
1
2
Fig. 14
Advertisement
Chapters
Table of Contents
