Lenovo ThinkStation D20 Hardware Maintenance Manual page 103

9. Carefully lift the system board out of the chassis.
10. Remove the microprocessor socket cover from the new system board.
11. Remove the microprocessor from the failing system board and install it on the new system board.
See "Replacing the microprocessor" on page 92.
12. The failing system board must be returned with a microprocessor socket cover to protect the pins during
shipping and handling. Install the microprocessor socket cover removed from the new system board on
the failing system board. To install the microprocessor socket cover:
a. Release the lever securing the microprocessor retainer and open the retainer to access the
microprocessor.
b. Grasp the microprocessor on the sides and lift it straight up and out of the socket. Do not touch the
contacts on the microprocessor socket.
c. Align the notches
microprocessor socket. Lower the socket cover straight down into the microprocessor socket
on the system board.
1 of the microprocessor socket cover with the alignment keys
.
Chapter 10 Replacing FRUs (Type 4105, 4157, 4217)
2 of the
95