Post Error Codes - Lenovo ThinkStation D20 Hardware Maintenance Manual

POST error codes

Each time you power-on the system, it performs a series of tests that check the operation of the system
and some options. This series of tests is called the Power-On Self-Test, or POST. POST does the following
operations.
• Checks some basic system-board operations
• Checks the memory operation
• Starts the video operation
• Verifies that the boot drive is working
If the POST detects a problem, an error message appears on the screen. A single problem can cause several
error messages to appear. When you correct the cause of the first error message, the other error messages
probably will not appear on the screen the next time you turn on the system.
POST Error Message
CMOS battery failed
CMOS checksum error - defaults loaded
CPU at nnnn
Press Esc to skip memory test
HARD DISK INSTALL FAILURE
Keyboard error or no keyboard present
Memory Test:
Memory test fail
72
ThinkStation Hardware Maintenance Manual
Description/Action
The CMOS battery is no longer functional.
Replace the battery.
Checksum of CMOS is incorrect.
The computer loads the default configuration settings.
This error might indicate that CMOS has become corrupt
due to a weak CMOS battery.
nnnn is the running speed of the microprocessor.
Pressing Esc skips the full memory test
Cannot find or initialize the hard disk drive controller or
the drive.
Make sure the hard disk drive is correctly installed.
If no hard disk drives are installed, make sure the hard
disk drive selection in Setup is set to NONE.
Cannot initialize the keyboard.
Make sure the keyboard is properly connected to the
computer and that no keys are held pressed during POST.
To purposely configure the computer without a keyboard,
set the error halt condition in Setup to HALT ON ALL, BUT
KEYBOARD. The BIOS then ignores the missing keyboard
during POST.
This message displays during a full memory test, counting
down the memory areas being tested.
If POST detects an error during memory testing, additional
information appears. This information gives specifics
about the type and location of the memory error.