Replacing The Rear Fan Assembly - Lenovo ThinkStation C30 User Manual

Machine types: 1095, 1096, and 1097
Hide thumbs Also See for ThinkStation C30:
Table of Contents

Advertisement

8. Insert the two tabs
and then press the two tabs through the holes until the bracket is secured in place.
Figure 35. Installing the front fan assembly
9. Connect the front fan assembly cable to the front fan connector on the system board.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 57.

Replacing the rear fan assembly

Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page v.
This section provides instructions on how to replace the rear fan assembly.
To replace the rear fan assembly, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
50
ThinkStation User Guide
1
on the new front fan assembly bracket into the corresponding holes in the chassis,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents