Eclipse E-iSERV CD7100 Operation Manual page 14

Use the [SELECT] (Upper/Lower/Right/Left) button to move the map selection frame
3 3
in Town Map overall view or to jump to the next map in the corresponding heading
in close up view.
Upper : Jumps to the next map screen to the North of the current map displayed.
Lower : Jumps to the next map screen to the South of the current map displayed.
Right : Jumps to the next map screen to the East of the current map displayed.
Left : Jumps to the next map screen to the West of the current map displayed.
In OVERALL VIEW the above controls move the map selection frame in the corresponding direction.
4 4
Press the [ENTER] button to switch the Town Map View.
In OVERALL VIEW mode, pressing the [ENTER] button will display a CLOSE UP VIEW
map of the area specified by the map selection frame.
ATTENTION
• When downloading the Town Map fi le, the reduction scale of the map can be selected at the
server. The selectable scales are 1/20000, 1/40000 and 1/70000.
• If attempting to jump to outside the area using the [SELECT] button, the operation will be
invalid.
Operations when an optional GPS unit is connected
The following functions can be operated in addition to the standard functions when an optional
GPS unit is connected :
• Current position is displayed
• Automatic map switching
Pressing [ENTER] in CLOSE UP VIEW will switch
the display back to the OVERALL VIEW map.