Table of Contents
Advertisement
2.
With your computer
turned on, connect the
camera to it.
The back lamp should light
red, indicating that charging
has started.
The back lamp will go out
when charging is complete.
It takes about 140 minutes
to achieve a full charge.
Charging may take longer
depending on charging
conditions.
Back Lamp Operation
Lamp Status
Lit Red
Flashing Red
Off
3.
After charging is complete, disconnect the USB cable from the camera
and then from the computer.
USB port
Making sure that the
connector is towards the monitor screen side,
connect the cable to the camera.
Description
Charging
Abnormal ambient temperature,
charging taking abnormally long,
or battery problem (page 120)
Charging complete
19
USB cable
(included with camera)
Large connector
Small connector
mark on the USB cable
[USB/AV] port
Back lamp
Quick Start Basics
Advertisement
Table of Contents
