Radio Operations; Manual Tuning; Automatic Seek Tuning - Alpine CDM-7856R Owner's Manual

Radio Operations

TUNE / A.ME
SOURCE
g DN

Manual Tuning

1
Press the SOURCE button to select the radio
mode.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
F1(FM1) F2(FM2)
3
Press the TUNE button repeatedly until "DX
SEEK" and "SEEK" disappear from the display.
NOTE
The initial mode is DX SEEK.
4
Press the g DN or f UP button to move
downward or upward one step respectively until
the desired station frequency is displayed.
8
-EN
BAND
f UP F
MW LW
Preset buttons
(1 through 6)

Automatic Seek Tuning

1
Press the SOURCE button to select the radio
mode.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
F1(FM1)
3
Press the TUNE button to illuminate the DX and
SEEK indicators in the display.
The SEEK indicator illuminates. With the DX
mode activated, both strong and weak stations
will be tuned in the Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
illuminate for a few seconds. Now, only strong
stations will be tuned.
4
Press the g DN or f UP button to
automatically seek a station downward or
upward respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next
station.
F2(FM2) MW LW