2. Wireless Manual Flash With Varied Flash Output
You can set a different flash output for each slave unit (A, B, and C) as
follows.
72
On the master unit, press the
1
<
> button and select M.
Press the <
2
select
• Pressing the <
the selection in the following loop:
Flash output
Press the <
3
ON A:B or A:B:C
•
ON A:B or A:B:C will blink.
Press the <
4
• A and the flash output display will blink.
Press the < > or < > button to set
5
the flash output for A.
Press the <
6
• B and the flash output display will blink.
> button and
.
> button changes
(Off)
> button to select
> button.
> button.