Flash Mode; Setting The Film Speed; Lcd Panel Illumination - Canon SPEEDLIGHT 550EX Instructions Manual

9. Flash Mode

The following flash modes can be set with the <
TTL) autoflash, manual flash, and stroboscopic flash. Pressing the <
button changes the flash mode in the following loop:

10. Setting the Film Speed

The film speed is set automatically according to the film speed set with the
camera.

11. LCD Panel Illumination

/
Press the < > button to illuminate the
LCD panel for 12 sec. To turn off the
illumination, press the <
again.
• The illumination stays on longer than 12 sec. if
you press any button other than the <
and < > buttons.
> button: E-TTL (or
> button
>
>
21