Table of Contents
Advertisement
Command
HELP
EXIT, QUIT
SHOW CONFIG
SHOW CONFIG OPTIONS SHOW CONFIG OPTIONS
SHOW CONFIG SCRIPT
SET CONFIG
SHOW SN
SET SN
SHOW BOOT
SET BOOT
SET BOOT (alternate usage
for scripting)
SHOW IPL
SET IPL
SHOW PCI
SET PCI
Usage
HELP or HELP <command>
EXIT, QUIT
SHOW CONFIG
SHOW CONFIG <option>
SHOW CONFIG SCRIPT
SET CONFIG <choice>
<option>
SHOW SN
SET SN <serial #>
SHOW BOOT
SET BOOT <controller #>
SET BOOT <order #> <PCI
Vendor/DevID> <PCI Slot #>
<PCI Bus #> <PCI Device #>
<PCI Fcn #>
SHOW IPL
SET IPL [A:|C:|CD|PXE]
<new IPL Priority>
SHOW PCI
SET PCI <device #> <IRQ>
Description
Displays all supported commands or usage and
descriptions of a specific command.
Exits RBSU and resets or power-cycles system.
SHOW CONFIG displays all available
<options>
SHOW CONFIG <option> displays current
setting and all other setting choices for <option>
specified.
SHOW CONFIG SCRIPT displays the script
required to recreate the settings of the server.
Displays list of CONFIG options that are
viewable or settable using SHOW or SET
CONFIG on this server.
Displays the script of SET commands required to
recreate all the server system-related
configuration settings. Does not display script for
Passwords, Date/Time, or Serial Number.
Sets CONFIG option setting to choice specified
by <choice> that corresponds to the number of
the choice listed by SHOW CONFIG for that
particular option.
Displays current serial number value.
Set serial number to the value specified.
Displays currently configured boot controller
order list.
Sets new primary boot controller to controller
number in list displayed by SHOW BOOT
command and then displays the new list.
Sets controller order # entry to device specified
by PCI ID and location. This format is only used
by SCRIPT driven commands. Order # is 1-based
where 1 means the primary boot controller, and
so on.
Displays current standard boot order device list
of IPL devices in priority order.
Sets standard boot order priority for the IPL
device specified to new priority number
specified. The device specified must be
represented in the current IPL list displayed by
SHOW IPL.
Displays a list of all PCI devices and their current
IRQ settings or disabled status. Also, displays a
list of IRQs available for PCI devices to use.
Sets an override IRQ value (1-15) for the PCI
device selected where <#> corresponds to the
number of the PCI device in the list displayed by
the SHOW PCI command. Use 0 for the <IRQ>
value to disable a PCI device.
Command Line Interface 121
Advertisement
Table of Contents
