Locating Internal Drives - Lenovo ThinkCentre M75e Hardware Maintenance Manual

Hardware maintenance manual
Hide thumbs Also See for ThinkCentre M75e:
Table of Contents

Advertisement

Figure 37. System board part locations
1
Microprocessor
2
Microprocessor fan connector
3
Memory slots (4)
4
Thermal sensor connector
5
24-pin power connector
6
Battery
7
Clear CMOS (Complementary Metal Oxide
Semiconductor) /Recovery jumper
8
SATA connectors (4)
9
Front panel connector
10
Front USB connector

Locating internal drives

Internal drives are devices that your computer uses to read and store data. You can add drives to your
computer to increase storage capacity and enable your computer to read other types of media. Internal
drives are installed in bays. In this manual, the bays are referred to as bay 1, bay 2, and so on.
When installing or replacing an internal drive, it is important to note the type and size of the drive that you
can install or replace in each bay and correctly connect the cables to the drive installed. Refer to the
appropriate section in Chapter 9 "Replacing FRUs (Machine Types: 4163, 5042, 5046, 5052, 5054, 5056,
5058, 5060, 5062, 5064, and 5066.)" on page 101 for instructions on how to install or replace internal
drives for your computer.
104
ThinkCentre Hardware Maintenance Manual
11
Cover presence switch connector (also called intrusion
switch connector)
12
Front USB connector
13
Serial (COM 2) connector
14
PCI card slot
15
Power fan connector
16
Internal speaker connector
17
Front audio connector
18
PCI Express x1 card slots (2)
19
PCI Express x16 graphics card slot
20
System fan connector
21
4-pin power connector

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents