Element Flat Panel Television User Manual page 19

Chapter  Installing the TV

Use a supplied antenna cable to connect the TV signal to the TV's TV CABLE terminal.

Connect the DC plug of the AC-DC adapter to the DC 12V port at the back of the TV.

Connect the AC-DC adapter and its power cord. Connect the power cord to wall outlet.

Press the button on the remote to turn on the TV.
Always disconnect the TV from the main voltage when the TV will not be used for
a long period of time. The POWER button on the front panel is only used for
switching the TV into standby, it does not disconnect the device from the main
voltage. To completely disconnect the main voltage, please remove the power
plug from the socket.

Press the
INPUT
select TV(CABLE/ANTENNA) and press the OK button.
Input Source
 TV(CABLE/ANTENNA)
VIDEO1 (AV)
VIDEO2 (YPbPr)
VIDEO3 (HDMI)
COMPUTER(VGA)
VHF/UHF IN
button on the remote to display the Input List. Use the ▲▼ buttons to