Element Flat Panel Television User Manual page 11

Chapter  Introducing the TV
How to setup the TV

Use a supplied antenna cable to connect the VHF/UHF signal to the TV's ANT.
terminal (refer to page14-18).

Connect the AC power cord to the back of the TV and connect the power cord to the
wall outlet.

Insert the 2 batteries supplied in remote control.
Step Slide the back cover up to open the
battery compartment of the remote
control.
Step Insert two AAA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner
etc.) on the remote, as it may cause damage.

C onnect other external AV devices (refer to page19-24).
0