Playing Back Ipod Music; Connecting An Ipod - Yamaha RX-V473 Owner's Manual

Playing back iPod music

You can play back iPod music on the unit using a USB cable
supplied with the iPod.
• Some features may not be compatible, depending on the model or software
version of the iPod.
• To play back iPod videos on the unit, an Apple Composite AV Cable (not supplied)
is required. Connect the USB and composite video plugs of the Apple Composite
AV cable to the USB jack and VIDEO AUX (VIDEO) jack of the unit, and connect
your TV and the unit with a video pin cable (p.22). To select a video, operate the
iPod itself in the simple play mode (p.48).
Supported iPods (as of December 2011)
• iPod touch, iPod nano (2nd gen. to 6th gen.)
• iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone
• iPad2, iPad

Connecting an iPod

Connect your iPod to the unit with the USB cable supplied with the
iPod.
1
Connect the USB cable to the iPod.
2
Connect the USB cable to the USB jack.
The unit (front)
RADIO
VIDEO AUX USB
STRAIGHT
AUDIO VIDEO iPod/iPhone/iPad
5V 2.1A
USB
Connected
• The iPod charges while it is connected to the unit. If you set the unit to standby
mode while the iPod is charging, the iPod continues to charge up to 4 hours.
If "Network Standby" (p.78) in the "Setup" menu is set to "On", it continues to
change until full.
• Disconnect the iPod from the USB jack when it is not in use.
PLAYBACK ➤ Playing back iPod music
VOL.
SW
C
L R
SL SR
46
En