Yamaha RX-V473 Owner's Manual page 63

Item Function
Configures the repeat setting for the iPod (p.49),
Repeat (Repeat)
USB storage device (p.52), or media server (p.55).
Configures the shuffle setting for the iPod (p.49),
Shuffle (Shuffle)
USB storage device (p.52), or media server (p.55).
Enables/disables volume controls from iTunes/iPod
Volume Interlock (Interlock)
via AirPlay.
■
Tone Control (Tone Control)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments
Default
Bypass (Bypass)
• If you set an extreme value, sounds may not match those from other channels.
Adjusting with the front panel controls
a Press TONE CONTROL to select "Treble" or "Bass".
b Press PROGRAM to make an adjustment.
■
DSP/Surround (DSP/Surround)
Configures the sound field program and surround settings.
❑ DSP Level (DSP Level)
Adjusts the sound field effect level.
Setting range
-6 dB to +3 dB (1 dB increments)
Default
0 dB
❑ Adaptive DRC (A.DRC)
Page
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
—
when the volume level is adjusted. When it is set to "On", it is useful for listening to
playback at a low volume at night.
—
Settings
65 On (On)
Off (Off) (default)
If "On" is selected, the dynamic range becomes narrow at a low volume and wide at a
high volume.
Volume: low
On
Off
Input level
❑ Extended Surround (EXTD)
(RX-V573 only)
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers
are used.
Settings
Auto (Auto)
(default)
bPLIIx Movie
(bPLIIxMo)
bPLIIx Music
(bPLIIxMu)
EX/ES (EX/ES)
Off (Off)
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
Automatically adjusts the dynamic range.
The dynamic range is not automatically adjusted.
Volume: high
On
Off
Input level
Automatically selects the most suitable decoder if signals that contain
surround back channel signals are input, and reproduces the signals
in 6.1- or 7.1-channel. If two surround back speakers are connected,
the unit reproduces the 5.1-channel signals in 7.1-channel.
Always reproduces signals in 7.1-channel using the Dolby Pro Logic
IIx Movie decoder. This setting is available only when two surround
back speakers are connected.
Always reproduces signals in 6.1- or 7.1-channel using the Dolby Pro
Logic IIx Music decoder. This setting is available only when one or two
surround back speakers are connected.
Automatically selects the Dolby EX or DTS-ES decoder, and
reproduces signals in 6.1- or 7.1-channel.
Always reproduces signals in their original channels. (Even when
DTS-ES or Dolby Digital EX signal is input, the unit reproduces the
signal in 5.1-channel.)
63
En