Viessmann Vitola 200 Technical Manual page 7

Legend
BD Boiler Drain
BTS Boiler Temperature Sensor
BWR Boiler Water Return
BWS Boiler Water Supply
FGC Flue Gas Collar
SR Safety Return
SS Safety Supply
Boiler Stand
Vitocell-H
Mounting the Vitola 200 on a Vitocell-H
The Vitola 200 can be mounted on a
Vitocell-H as shown to reduce the
footprint of heating equipment in the
mechanical room. Do not attempt to
install combinations not listed in the
Price List.
Boiler/Tank Compatibility
Support bars may be required when
mounting a Vitola 200 boiler on a
Viessmann Vitocell-H Series tank.
Refer to the following chart to determine
whether support bars are required for your
application.
Boiler/Tank Compatibility
Vitola 200
VB2-18/-22
VB2-33
VB2-40
VB2-50/-63
Order No. = Support bars are required.
z =
Support bars are not required. Boiler/tank are directly compatible.
n.a. = Boiler/tank are incompatible. Neither mounting with support bars, nor direct-mounting possible.
Order numbers are listed for boiler/tank
combinations requiring support bars.
Certain boilers (listed with a "z" in the
chart) are directly compatible with the
Vitocell-H tank and thus do not require
additional hardware.
Vitocell-H 100
DHW storage tank
CHA-160 CHA-200
z z
z z
n.a.
z
n.a. n.a.
5¾" /
145 mm
Combinations listed with "n.a." are
incompatible. Do not attempt to install these
combinations.
For more information see Viessmann Price
List.
EHA-160 EHA-200
z z
z z
n.a.
z
n.a. n.a.
Technical Data
SS
BWS
BWS
BWR
BWR
FGC
SR/BD
Vitocell-H 300
DHW storage tank
EHA-350 EHA-450
n.a. n.a.
n.a.
z
Z001 060
z
Z001 060
z
7