Power Save Settings; Channel Settings; Auto Installation; Channel Detail Settings - Sharp Aquos LC-32LE600E Operation Manual

Basic adjustment

Power Save Settings

ECO
ECO picture control
Energy Save
No Signal Off
No Operation Off
ECO
ECO picture control
This function automatically detects the image source and
decreases the power consumption while keeping the
brightness of the image unchanged.
NOTE
• This function does not work when "AV MODE" is set to
"DYNAMIC (Fixed)".
• This function does not work when "Energy Save" is set to
"Standard" or "Advanced".
ECO
Energy Save
This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
The backlight brightness is the same
Off value of your settings in the selected
"AV MODE".
Standard Reduces the backlight brightness.
Reduces the backlight brightness more
Advanced
than "Standard".
NOTE
• This function does not work when "AV MODE" is set to
"DYNAMIC (Fixed)".
E
"Energy Save" status icons
Icon
"Energy Save" is set to "Standard".
"Energy Save" is set to "Advanced".
20
[On]
[Standard]
[Disable]
[Disable]
Item
Description
ECO
No Signal Off
When set to "Enable", the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
ECO
No Operation Off
The TV will automatically enter standby mode if no
operations are performed during the time span you set
("30 min." or "3 hr.").

Channel Settings

Auto Installation

Setup
Auto Installation
The TV automatically detects and stores all available
channels in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
After selecting "Yes" on the screen, you can
set language and channel search the same as
in the initial auto installation.
NOTE
• PIN input is required when executing "Auto Installation". The
default PIN is "1234". To change the PIN setting, refer to
Password/Parental lock settings (Page 22). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN (Page 24).
• You cannot set the Home/Store setting and the country
setting in "Auto Installation" in the "Setup" menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing "Reset" from the "Setup" menu.

Channel detail settings

Setup
Programme Setup
You can reconfigure the DTV/ATV channel settings
automatically or manually.
NOTE
• PIN input is required when executing "Programme Setup".
The default PIN is "1234". To change the PIN setting, refer to
Password/Parental lock settings (Page 22). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN (Page 24).