Before Turning On The Power - Sharp Aquos LC-32LE600E Operation Manual

Quick guide

Before turning on the power

1
2

Cable clamp (Bundle the cables with the clamp)

Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable

Turn on (;) the MAIN POWER switch on the left side of the TV.

AC cord (Product shape varies in some countries)
* The AC cord is supplied either with a ferrite core or without a ferrite core. Neither
type causes unnecessary electrical wave emissions or interference.
Supplying power to the antenna
When an active antenna is used, power must be supplied to the antenna using the following procedures after
connecting the antenna cable to the antenna terminal on the rear of the TV in order to receive terrestrial digital
signals.
Press @ and the "MENU" screen displays.
1
Press c/d to select "Setup".
2
Press a/b to select "Antenna Setup", and then press ;.
3
Press a/b to select "Supply Voltage", and then press ;.
4
Press c/d to select "On", and then press ;.
5
Mounting the TV on a wall
• This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 30).
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
• Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that
results in accident or injury.
• You can ask qualified service personnel about using an optional bracket and attachment* to mount the TV to a wall.
• To use this TV mounted on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and then use the screws
supplied with the wall mount bracket to secure the bracket to the rear of the TV.
• When you mount the TV on a wall, you should attach the supporting post.
* Only for 40 inch models.
8
*
Place the TV close to the AC outlet,
and keep the power plug within
reach.