Mounting The Sewing Foot Lifting Solenoid - Duerkopp Adler 281 Service Instructions Manual

3.3.2

Mounting the sewing foot lifting solenoid

3
2
1
10
9
–
Unscrew the handwheel 3, covering 2 and cover 1.
–
Unclamp the spring 4.
–
Loosen the screws 6 and remove the mounting flange 5.
7
8
–
Screw the holder 10 to the solenoid 8 using the screws 9 provided.
–
Fit the push rod 7 to the solenoid.
–
Screw the mounting flange 11 that has been removed to the holder
10 using one of the screws 6.
6
11
6a
10
5 4
GB
15