Technical Specifications; Cabinet Finish - Tannoy Reveal X User Manual

6.0 TECHNICAL SPECIFICATIONS

Loudspeaker
Frequency response (1)
Recommended amplifier power
Power handling
Nominal Impedance
Sensitivity (3)
Distortion
Crossover frequency
Cabinet
Drive units
Low frequency design
Cabinet construction

Cabinet finish

Cabinet dimensions (HxWxD)
Cabinet weight
Shipping dimensions (HxWxD)
Shipping weight
NOTES : (1) +/- 3 dB , measured at 1m in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS426A.
(3) Averaged over specified bandwidth for half-space environment. For anechoic conditions the figure is to be decreased
by 3 dB.
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
65 Hz - 20 kHz
60 to 150 W rms into 8
Average (2) Programme
75 W rms 150 W rms
8
90 dB SPL / 2.83v @ 1 m
< 0.8%
2.7 kHz
2 x Tannoy shielded 6.5" bass driver (1690)
Tannoy shielded 1" soft dome tweeter (1205)
Optimised bass-reflex load, in 19 litres
40mm MDF front baffle,
16 mm high-density particle board.
Internal Steel plate for magnetic shielding.
Red satin finish front
Grey suedette vinyl sides and back
210mm x 528mm x 270mm
12.1 kg
300mm x 630mm x 343mm
13.3 kg